Samson SG 23 SCHWANENHALS FRONTTANK 3.000
Dealer number
MEP2524944
Merke
Samson
Modell
SG 23 SCHWANENHALS FRONTTANK 3.000
Årsmodell
2018
Ytterligere informasjon
Type: Brukt maskin
Merke: Samson
Modell: SG 23 SCHWANENHALS FRONTTANK 3.000
Årsmodell: 2018
Hastighet km/t: 40
hektar: 204
Detaljer
used SAMSON gooseneck slurry tanker
Additional SAMSON front tank 3,000 liters
Fittingly mounted on the Claas Xerion
Demonstration/ DEMO drum, 22.6 m³ tank capacity,
PTG Tyre pressure
NIR sensor
2 axles, hydraulically suspended,
forced steering of the rear axle and
Possibility of "crab steering
Standard. Carriage is made of high strength
Steel constructed with 5 mm wall thickness,
painted on the inside with epoxy
treated. Drive is fully hydraulic
via hydraulic pump, which is mounted on tractor
PTO shaft is plugged in.
The emptying pump with stone trap and
with 5 pump blades, integrated in
pump sump, is infinitely variable
adjustable and with high capacity
equipped.
Further basic equipment:
Slurry Master 8000 for full control
and data backup, section emptying,
Tank level sensor, inspection cap,
3 point linkage double acting Cat. 3
incl. top link, double-acting active
Control of the lifting gear, joystick control
complete vehicle incl. filling pump
and steering,toolbox,water tank,
Work lights. Support foot with
Hand pump, drag hose linkage
Bracket, legal lighting for
Germany. Air brakes 406x140mm.
Hitching via 110mm Scharmüller
Ball socket to tractor ball 110mm.
Tyres 750/60 R 30,5 Radial Type 390
Pump tower with suction including
Ejector (replaces filling funnel)
Suction nozzle for pump tower with suction
8" Bauer, 45°, quick coupling on
Pump housing
Suction nozzle for pump tower with suction
8" Bauer, 90°, quick coupling at
Pump housing
Slurry Master 8000 including
Joystick (replaces Slurry Master 6000)
Height sensor on lift
Signal cable SM 8000 for GPS, so that the
scattered area is visible
LINCOLN central lubrication system (factory
mounted) including pump station
Lubrication system Connection for attached
Devices
2x camera and 7" colour screen
Storage box for intake manifold
and docking station
Fixed mounted filling pump
Control system (drilled axes and
hydraulics)
with camera and working light
The front tank is equipped inside with EPOXY
treated and exterior with SAMSON GREEN
lacquered. It is mounted with a
5" slurry pump, level gauge and
Parking supports.
5" stirring function in the tank
Front camera
204 ha area, 1893 application rate
Automatic translation from German without guarantee.
Show original description
Additional SAMSON front tank 3,000 liters
Fittingly mounted on the Claas Xerion
Demonstration/ DEMO drum, 22.6 m³ tank capacity,
PTG Tyre pressure
NIR sensor
2 axles, hydraulically suspended,
forced steering of the rear axle and
Possibility of "crab steering
Standard. Carriage is made of high strength
Steel constructed with 5 mm wall thickness,
painted on the inside with epoxy
treated. Drive is fully hydraulic
via hydraulic pump, which is mounted on tractor
PTO shaft is plugged in.
The emptying pump with stone trap and
with 5 pump blades, integrated in
pump sump, is infinitely variable
adjustable and with high capacity
equipped.
Further basic equipment:
Slurry Master 8000 for full control
and data backup, section emptying,
Tank level sensor, inspection cap,
3 point linkage double acting Cat. 3
incl. top link, double-acting active
Control of the lifting gear, joystick control
complete vehicle incl. filling pump
and steering,toolbox,water tank,
Work lights. Support foot with
Hand pump, drag hose linkage
Bracket, legal lighting for
Germany. Air brakes 406x140mm.
Hitching via 110mm Scharmüller
Ball socket to tractor ball 110mm.
Tyres 750/60 R 30,5 Radial Type 390
Pump tower with suction including
Ejector (replaces filling funnel)
Suction nozzle for pump tower with suction
8" Bauer, 45°, quick coupling on
Pump housing
Suction nozzle for pump tower with suction
8" Bauer, 90°, quick coupling at
Pump housing
Slurry Master 8000 including
Joystick (replaces Slurry Master 6000)
Height sensor on lift
Signal cable SM 8000 for GPS, so that the
scattered area is visible
LINCOLN central lubrication system (factory
mounted) including pump station
Lubrication system Connection for attached
Devices
2x camera and 7" colour screen
Storage box for intake manifold
and docking station
Fixed mounted filling pump
Control system (drilled axes and
hydraulics)
with camera and working light
The front tank is equipped inside with EPOXY
treated and exterior with SAMSON GREEN
lacquered. It is mounted with a
5" slurry pump, level gauge and
Parking supports.
5" stirring function in the tank
Front camera
204 ha area, 1893 application rate
Automatic translation from German without guarantee.
Show original description
gebr. SAMSON-Schwanenhals-Güllewagen
zusätzlich SAMSON Fronttank 3.000 Liter
Passend angebaut am Claas Xerion
Vorführ/ DEMO-Fass, 22,6 m³ Tankinhalt,
PTG Reifendruck
NIR Sensor
2 Achsen, hydraulisch gefedert,
Zwangslenkung der Hinterachse und
Möglichkeit der "Hundegang" Lenkung
Standard. Wagen ist aus hochfestem
Stahl mit 5 mm Wandstärke konstruiert,
lackiert auf der Innenseite mit Epoxy
behandelt. Antrieb erfolgt vollhydr.
über Hydraulik Pumpe, die auf Traktor
Zapfwelle gesteckt wird.
Die Entleerungspumpe mit Steinfalle und
mit 5 Pumpenflügel, integriert im
Pumpensumpf angebracht, ist stufenlos
regulierbar und mit hoher Kapazität
ausgestattet.
Weitere Grundausstattung:
Slurry Master 8000 zur vollen Steuerung
und Datensicherung, Sektionsleerung,
Tankfüllstandssensor, Inspektionsdeckel,
3 Punkt-Hubwerk doppelwirkend Kat. 3
inkl. Oberlenker,doppelwirkende aktive
Steuerung des Hubwerks,Joysticksteuerung
gesamten Fahrzeuges inkl. Befüllpumpe
und Lenkung,Werkzeugkasten,Wassertank,
Arbeitsscheinwerfer. Stützfuss mit
Handpumpe, Schleppschlauchgestänge
Halterung, gesetzliche Beleuchtung für
Deutschland. Luftbremsen 406x140mm.
Anhängung erfolgt über 110mm Scharmüller
Kugelpfanne an Traktor Kugel 110mm.
Bereifung 750/60 R 30,5 Radial Type 390
Pumpenturm mit Ansaugen einschließlich
Ejektor (ersetzt Befülltrichter)
Saugstutzen für Pumpenturm mit Ansaugung
8" Bauer, 45°, Schnellkupplung am
Pumpengehäuse
Saugstutzen für Pumpenturm mit Ansaugung
8" Bauer, 90°, Schnellkupllung am
Pumpengehäuse
Slurry Master 8000 einschliesslich
Joystick (ersetzt Slurry Master 6000)
Höhensensor auf Lift
Signalkabel SM 8000 für GPS, damit die
gestreute Fläche ersichtlich ist
Zentralschmieranlage LINCOLN (werkseitig
montiert) einschliesslich Pumpenstation
Schmieranlage Anschluss für angebaute
Geräte
2x Kamera und 7" Farbbildschirm
Aufbewahrungskasten für Saugstutzen
und Andockstation
Festmontierte Befüllpumpe
Regelsystem (gebohrte Achsen und
Hydraulik)
mit Kamera und Arbeitslicht
Der Fronttank ist innen mit EPOXY
behandelt und aussen mit SAMSON GRÜN
lackiert. Er ist montiert mit einer
5" Güllepumpe, Füllstandsmesser und
Abstellstützen.
5" Rührfünktion im Tank
Frontkamera
* 204 Ha Fläche, 1893 Ausbringmenge *
zusätzlich SAMSON Fronttank 3.000 Liter
Passend angebaut am Claas Xerion
Vorführ/ DEMO-Fass, 22,6 m³ Tankinhalt,
PTG Reifendruck
NIR Sensor
2 Achsen, hydraulisch gefedert,
Zwangslenkung der Hinterachse und
Möglichkeit der "Hundegang" Lenkung
Standard. Wagen ist aus hochfestem
Stahl mit 5 mm Wandstärke konstruiert,
lackiert auf der Innenseite mit Epoxy
behandelt. Antrieb erfolgt vollhydr.
über Hydraulik Pumpe, die auf Traktor
Zapfwelle gesteckt wird.
Die Entleerungspumpe mit Steinfalle und
mit 5 Pumpenflügel, integriert im
Pumpensumpf angebracht, ist stufenlos
regulierbar und mit hoher Kapazität
ausgestattet.
Weitere Grundausstattung:
Slurry Master 8000 zur vollen Steuerung
und Datensicherung, Sektionsleerung,
Tankfüllstandssensor, Inspektionsdeckel,
3 Punkt-Hubwerk doppelwirkend Kat. 3
inkl. Oberlenker,doppelwirkende aktive
Steuerung des Hubwerks,Joysticksteuerung
gesamten Fahrzeuges inkl. Befüllpumpe
und Lenkung,Werkzeugkasten,Wassertank,
Arbeitsscheinwerfer. Stützfuss mit
Handpumpe, Schleppschlauchgestänge
Halterung, gesetzliche Beleuchtung für
Deutschland. Luftbremsen 406x140mm.
Anhängung erfolgt über 110mm Scharmüller
Kugelpfanne an Traktor Kugel 110mm.
Bereifung 750/60 R 30,5 Radial Type 390
Pumpenturm mit Ansaugen einschließlich
Ejektor (ersetzt Befülltrichter)
Saugstutzen für Pumpenturm mit Ansaugung
8" Bauer, 45°, Schnellkupplung am
Pumpengehäuse
Saugstutzen für Pumpenturm mit Ansaugung
8" Bauer, 90°, Schnellkupllung am
Pumpengehäuse
Slurry Master 8000 einschliesslich
Joystick (ersetzt Slurry Master 6000)
Höhensensor auf Lift
Signalkabel SM 8000 für GPS, damit die
gestreute Fläche ersichtlich ist
Zentralschmieranlage LINCOLN (werkseitig
montiert) einschliesslich Pumpenstation
Schmieranlage Anschluss für angebaute
Geräte
2x Kamera und 7" Farbbildschirm
Aufbewahrungskasten für Saugstutzen
und Andockstation
Festmontierte Befüllpumpe
Regelsystem (gebohrte Achsen und
Hydraulik)
mit Kamera und Arbeitslicht
Der Fronttank ist innen mit EPOXY
behandelt und aussen mit SAMSON GRÜN
lackiert. Er ist montiert mit einer
5" Güllepumpe, Füllstandsmesser und
Abstellstützen.
5" Rührfünktion im Tank
Frontkamera
* 204 Ha Fläche, 1893 Ausbringmenge *
Lignende Offer
Samson Pg Ii 18 Pte Slurry Master 8000
Årsmodell 2020, 3142 h,Antall: 14854
CLAAS Bordesholm GmbH, DE - 24582 Bordesholm
Samson Pg Ii 18 Pte Slurry Master 8000
Årsmodell 2020, 3142 h,Antall: 14854
CLAAS Bordesholm GmbH, DE - 25560 Schenefeld
Samson Pg 18
Årsmodell 2014, 1641 h,Antall: 15455
CLAAS Bordesholm GmbH, DE - 25920 Risum-Lindholm
Samson Pg 18
Årsmodell 2009,Antall: 15326
CLAAS Bordesholm GmbH, DE - 24582 Bordesholm