BRAND B70-10-60 J2Z

Dealer number ATC2999689
Pris med skatt 19 % 23.681 €
Pris uten skatt 19.900 €
Merke BRAND
Modell B70-10-60 J2Z
Årsmodell 2021
Ytterligere informasjon
Type: Brukt maskin
Merke: BRAND
Modell: B70-10-60 J2Z
Årsmodell: 2021

Detaljer

Brand slurry mixer
-PTO shaft mixer with two joints
Mixer length:
from lower link pin to center joint:
7,0 m
from center joint to center joint:
1,0 m
from center joint to end of mixer wing:
6,0 m
Hydraulic lateral pivoting 1 double-acting
Control unit and a pressure-free return line
required
-Wing support for lateral swivel SBG
-Lighting incl. warning sign
-Walterscheid PTO shaft Power-Drive
PWZ580
Special PTO shaft
with special bearing and seal
for increased loads and
extended lubrication interval
depending on operating conditions
For power classes up to 150 hp at 540
rpm
or up to 220 hp at 1000 rpm.
Basic equipment :
- Double-jointed mixer in sturdy
flanged heavy-duty design
- Segment tube outer diameter 133 mm
- Segment tube outside diameter in front
blade 102 mm
up to the second joint
powder-coated,
galvanized from the second joint to the sash
- Subsequently adjustable due to
changeable
- Hollow drive shafts with inserted
highly tempered
connecting shafts for high torques
torques 1
3/8 inch 21 pcs.
This ensures particularly smooth running
of the shafts is achieved.
- Lubricated for life
ball bearings at
every flange point
- High-quality vane seal on
polished bushing
incl. seal protection disk for a
long service life
- 3-point support with adjustable
adjustable support feet and support frame
heavy-duty design, powder-coated
- On the 3-point hitch with two hydraulic
cylinders
(1 double-acting control unit required)
- Double joint with hydraulic
actuation
- With patented synchronized control of the
joints
- Holder for PTO shaft and holder for
grease gun
- Efficient high-performance sash
D 600 mm, powder-coated
set for pressing
(specify other version when ordering)
specify)
Automatic translation from German without guarantee.
Show original description

Kontaktinformasjon
AGRAVIS Technik Center GmbH
Hauptstr. 59
27404 Nartum
Tyskland
Kontaktperson

If you have any questions, comments or concerns, please call us.

02504 / 888 65 20